24 higher apprentice mechanical electrical engineering technician jobs found

Description Job Title: Higher Apprentice Radar Electrical / Mechanical Engineer Location: Cowes (Isle of Wight) The first 3 months of your apprenticeship will be spent undertaking initial engineering, health and safety training in the Skills Development Centre located in Portsmouth Naval Base. On successful completion of this training you will transfer to our manufacturing site, located at Cowes, Isle of Wight.  Salary: Starting from £22,500 with annual progression through the scheme duration What you’ll be doing:  •    Utilise engineering drawings, data and documentation in order to undertake the design, evaluation, measuring, diagnosing & verification of technical performance on a wide range of mechanical, electrical and electronic assemblies and components found within our complex Maritime and Land based Radar products •    This covers Radio Frequency transmit and receive modules, power regulators, control boards and other bespoke...

Description Job Title: Higher Apprentice Mechanical / Electrical Engineer Location: Portsmouth Naval Base (Hampshire) Salary: Starting from £22,500 with annual progression through the scheme duration What you’ll be doing:  •    Produce engineering drawings, data and documentation in order to facilitate the manufacture, installation, testing, commissioning, fault diagnosis, maintenance, overhaul and removal of electrical and data systems on maritime vessels •    This covers propulsion machinery, weapons, sensors, and auxiliary systems (such as water, air conditioning, electronic equipment including programmable logic controllers, power generation and distribution) •    Gaining knowledge and expertise of the design and use of electrical, electronic and combat systems to ensure safe embodiment of Capability Insertions •    Office-based drawing and document research, along with surveys and validation of systems onboard complex warships...

Description Job Title: Higher Apprentice Mechanical / Electrical Engineer Location: Broad Oak, Portsmouth (Hampshire) The first 3 months of your apprenticeship will be spent undertaking initial engineering, health and safety training in the Skills Development Centre located in Portsmouth Naval Base. On successful completion of this training you will transfer to our manufacturing site, located at Broad Oak in Hilsea.  Salary:  Starting from £22,500 with annual progression through the scheme duration What you’ll be doing:  •    Utilising engineering drawings, data and documentation in order to undertake the measuring, diagnosing & verification of technical performance on a wide range of electrical and electronic assemblies and components •    This covers sensors, automatic voltage regulators, wiring harnesses and other bespoke assemblies •    Gaining knowledge and expertise in the use of a wide range of common and specialist measuring and...

Description Job title: Apprentice Maintenance Technician Location: Radway Green Salary:  Starting from £18,023 with annual progression through the scheme duration. What you’ll be doing: Fault finding and repair, planned maintenance and operating the mechanical equipment used to manufacture our products. Fault finding on energised systems – including extra low voltage electrical, hydraulics and pneumatics, and power presses. Programmable Logic Control (PLC) programming support to maintain production processes. Planned maintenance on mechanical and control production equipment such as extra low voltage electrical, hydraulics and pneumatics, and power presses. Knowing, understanding and carrying out the correct use of gauges measuring equipment and recording Statistical Process Control (SPC) data for quality purposes. Knowing, understanding and carrying out the basic operations of a machine to:...

Description Job title: Apprentice Electrical Maintenance Technician Location: Glascoed Salary: Starting from £18,023 with annual progression through the scheme duration. What you’ll be doing: ⦁    You will work from engineering drawings, using data and documentation to carry out the manufacture, installation, testing, commissioning, fault diagnosis and maintenance of process equipment, i.e. mechanical, electrical, electronic, Programmable Logic Controllers (PLC), hydraulic and pneumatic equipment. This can range between utility and service distribution and equipment to highly automated munition manufacturing equipment. ⦁    Fault finding on energised systems, i.e. electrical, robots, servo drives, hydraulics and pneumatics. ⦁    Planned maintenance on electrical and mechanical equipment. ⦁    Planned maintenance on ATEX equipment (ATEX means equipment certified safe to use in an explosive environment). ⦁    Fault finding and...

Description Job title: Apprentice Mechanical Maintenance Technician Location: Glascoed Salary: Starting from £18,023 with annual progression through the scheme duration. What you’ll be doing: ⦁    You’ll be involved in working from engineering drawings, using data and documentation to carry out the manufacture, installation, testing, commissioning, fault diagnosis and maintenance of process equipment, i.e. mechanical, electrical, electronic, Programmable Logic Controllers (PLC), hydraulic and pneumatic equipment. This can range between utility and service distribution and equipment to highly automated munition manufacturing equipment. ⦁    You will be involved in fault finding, planned maintenance and testing on the electrical and mechanical systems for site. ⦁    Fault finding on energised systems, i.e. electrical, robots, servo drives, hydraulics and pneumatics. ⦁    Planned maintenance on electrical and mechanical equipment. ⦁...

Description Job title: Engineering Technical – Design Apprentice Location: Barrow-in-Furness (Cumbria) Salary:  Starting from £14,527 – £23,493 per annum dependent on age with annual progression throughout the scheme duration What you’ll be doing:   •    Studying towards a Level 3 Advanced Manufacturing Engineering qualification •    After the first year getting “badged” as either an Electrical, Mechanical or Hull & Outfit designer •    Having around 5 placements within the business with Designer teams on one of our Submarine programmes (Astute, Dreadnought and SSN AUKUS) creating models and outputs using the relevant CAD software (either CADDS5, FORAN or Siemens NX).  This training is all provided as part of your apprenticeship •    Learning and developing in teamwork, communication, sustainability and health & safety •    Working towards completion of a Level 3 End Point Assessment as an Engineering Design Technician...

Description Job title: Advanced Apprentice Engineering – Technician  Location: Glasgow Salary: Starting from £23,272 with annual progression through the scheme duration. What you’ll be doing: Potential career streams could include: Combat Systems Platform Integration, Electrical, Mechanical Engineer, Naval Architecture. Work on physical integration of COTS (Commercial Off The Shelf) & bespoke Combat Systems equipment & infrastructure. Providing proof of concept through requirements & calculations enabling detail design. Work across stage 1 electrical & mechanical design, naval architecture, PLM (Product Lifecycle Management) and systems placements providing detailed information to Stakeholders. Carry out investigations into operational problems or developments. Develop and prepare solutions, on your own or as a member of a team. What Qualifications Will You Get? PEO SVQ...

Description Job Title: Higher Apprentice Electrical / Electronic Test Engineer Location: Cowes (Isle of Wight) The first 3 months of your apprenticeship will be spent undertaking initial engineering, health and safety training in the Skills Development Centre located in Portsmouth Naval Base. On successful completion of this training you will transfer to our manufacturing site, located at Cowes, Isle of Wight where you will develop the skills and knowledge to undertake the role of a Test Engineer.  Salary: Starting from £22,500 with annual progression through the scheme duration What you’ll be doing:  •    You will gain valuable experience in electrical, mechanical and electronic manufacturing engineering environments •    Test Engineers utilise engineering drawings, data and documentation to undertake the measurement, diagnostics & verification of technical performance on a wide range of electrical and electronic components...

Description Job Title: Advanced Apprentice Manufacturing Technician Location: Broad Oak, Portsmouth – Hampshire  (For the first 12 months you will work within our Skills Development Centre located in Portsmouth Naval Base) Salary: Starting from £18,848 with annual progression through the scheme duration. What you’ll be doing:  •    Overhaul and manufacture components and assemblies found within our complex radar and underwater military products  •    Produce or re-furbish the components found in our underwater military products •    Interpret drawings/specifications to plan work, ensuring you have the right tools, equipment and resources to complete the task to the required specification •    Develop a detailed understanding of manufacturing and assembly techniques, to include, but not limited to, electrical wiring, mechanical fitting, printed circuit board rework and microelectronics processing •    During the first year you will be based...

Description Job Title: Advanced Apprentice Assembly Engineering Technician Location: Hillend (Dunfermline) Salary:  Starting from £18,848 with annual progression through the scheme duration. What you’ll be doing:  •    Manufacture, test, diagnosis, investigation, repair and modification of complex Radar, Avionics and underwater military products.  •    Gain a detailed understanding of assembly techniques, electrical wiring, mechanical fitting, printed circuit board (PCB) assembly and microelectronics processing.  •    Upon successful completion of the Assembly and Test Engineering Apprenticeship the apprentice will be able to perform complex assembly/disassembly or modification tasks to industry standards such as IPC and ANSIJ on electronic or mechanical components, subassemblies and systems – encompassing new build, repairs products or prototype products. What Qualification will you get? •    Level 6 SVQ Engineering Manufacture •...

Location: Crawley, United KingdomThales people architect solutions that enable two-thirds of planes to take off and land safely. We create in-flight entertainment systems that engross 50 million fliers every year and we develop the avionics that control the world's largest commercial aircrafts. Our simulators train the next generation of pilots for fighter jets, transporters and search and rescue helicopters. And, together, each and every member of our aerospace team makes a difference.Together we offer fantastic opportunities for committed employees to learn and develop their career with us. At Thales UK, we research, develop, and supply technology and services that impact the lives of millions of people each day to make life better, and keep us safer. We innovate across the major industries of Aerospace, Defence, Security and Space. Your health and well-being matters to us and that's why we offer you the flexibility to do what's important to you; whether that's part time hours,...

At BAE Systems Australia: Do interesting work that MATTERS ENJOY what you do GROW your career Be YOU BAE Systems Australia is proud to work in a thriving sector that puts us at the forefront of exciting and meaningful work. Every day, we push boundaries to deliver some of the world’s most innovative and advanced technologies. Recognised for delivering projects of global and national significance that help keep Australia safe, our shared passion shapes our culture, and our people make it a truly great place to work. We’re aleader in advanced manufacturing for the defence industry,expanding sovereign capability at ourEdinburgh Parks facility in Adelaide. Our programs delivering cutting-edge solutions across Police and Defence’s Air, Land, and Sea domains. About the OPPORTUNITY We currently have two exciting full-time, permanent opportunitie savailable within our Advanced Manufacturing – Service Centre team based at Edinburgh Parks, SA for a...

Description Job title: Advanced Apprentice  Engineering – Trials and Commissioning Location: Glasgow Salary: Starting from £23,272 with annual progression through the scheme duration. What you’ll be doing: Specialised Experience: Engage in highly skilled work within the Trials & Commissioning department, gaining valuable insights from a diverse team of mechanical and electrical engineers, and developing a strong foundation in engineering practices. Diverse Responsibilities: Participate in multi-disciplinary teams responsible for essential ship systems, including HVAC & Hotel (heating, ventilation, air conditioning, and freshwater production), Power & Propulsion (gas turbines and diesel generators), Hull & Deck (mission bay handling systems), Fixed Fire-Fighting systems, the Platform Management System for remote equipment control, and Low Voltage operations. Hands-On Learning: Acquire practical experience...

Description Job title : Advanced Apprentice Electrician Location: Glasgow Salary: Starting from £18,667 with annual progression through the scheme duration. What you’ll be doing: Comprehensive Training: Gain hands-on experience in installing, terminating, and testing electrical equipment by working from wiring diagrams, planned drawings, and company procedures in a high-tech marine environment. Diverse Skill Development: Develop expertise in installing a variety of electrical components and systems, including main distribution boards, fire detection systems, and integrated platform management systems during ship construction. Extensive Cabling Experience: Work with approximately 60+ miles of cabling on Type 26 vessels, ensuring each cable end is properly terminated, tested, and operational. Quality Assurance: Participate in check-wire activities to verify system integrity and compliance with schematics, ensuring...

Description Job title:  Higher Manufacturing Engineering Technician Apprentice   Location: Samlesbury and Warton   Salary: Starting from £18,018 with annual progression through the scheme duration.   What you’ll be doing: You will undertake your training at the Academy for Skills and Knowledge.  Gaining training in practical and theory-based engineering; learn electrical circuits, aircraft fitting, fabrication, flight line awareness, machining, carbon fibre and Computer Aided Design.    You will then also complete placements in Facilities Management, Production, Manufacturing Engineering, Infrastructure and Estates covering: •    Safe systems of working •    A technical contribution to the design, development, test, integration and support of products, equipment, systems, processes or services •    Techniques and procedures to solve engineering/manufacturing problems   What qualification will you...

Description Job title: Degree Apprentice Electrical & Electronic Engineer Location: Barrow-in-Furness (Cumbria) Salary:  £23,493 per annum, with annual progression through the scheme duration. What you’ll be doing: The field of Electrical Engineering encompasses two distinct areas: Internal Communications and Platform Data Systems (ICPDS) and Control and Instrumentation (C&I) In the realm of ICPDS, you will focus on resolving technical challenges related to wire-free communications, digital/IP telephony, POTS, visual surveillance, distributed media systems, broadcast audio, and fibre optics  In Control and Instrumentation, you will be dedicated to tackling technical inquiries such as conceptual design and development of control and instrumentation systems, engineering outputs for procurement and manufacturing, factory acceptance tests, system integration, supplier liaison, defect resolution, dockside test organisation...

Description Job title: Engineering Technical – Metrology Apprentice Location: Barrow-in-Furness (Cumbria) Salary:  Starting from £14,527 – £23,493 per annum dependent on age with annual progression through the scheme duration What you’ll be doing:   The Instrumentation Calibration Services (ICS) department has the responsibility of calibration, maintenance, managed collection, storage and delivery of test & measurement equipment to support the Barrow site & external commercial customers. Equipment maintained includes Electrical, Mechanical, Dimensional & Optical, Temperature, Gas, Fixed Plant and Ionizing Radiation test and measurement equipment. The core duties may include; •    Calibration, maintenance and repair of test and measurement equipment •    Working with subject matter experts to support and provide advice on critical measurement activities to ensure equipment meets specification •    Use of cutting-edge metrology...

Description Job Title:  Apprentice Electrical & Electronics Technician Location: Barrow-in-Furness (Cumbria) Salary: Starting from   £14,527 – £23,493 per annum dependent on age, with annual progression through the scheme duration What you’ll be doing:  The field of Electrical Engineering encompasses two distinct areas: Internal Communications and Platform Data Systems (ICPDS) and Control and Instrumentation (C&I) You will focus on resolving technical challenges related to wire-free communications, digital/IP telephony, POTS, visual surveillance, distributed media systems, broadcast audio, and fibre optics In Control and Instrumentation, you will be dedicated to tackling technical inquiries such as conceptual design and development of control and instrumentation systems, engineering outputs for procurement and manufacturing, factory acceptance tests, system integration, supplier liaison, defect resolution,...

Description Job title: Advanced Apprentice Manufacturing Engineer Location: Samlesbury and Warton Salary: Starting from £18,018 with annual progression through the scheme duration What you’ll be doing: Apprentices will learn skills in engineering practices – using tools and complex machines to carry out a range of tasks, operating safely and working on products in our manufacturing functions.  You’ll spend the 1st year gaining foundation skills, knowledge and behaviours before moving into your trade discipline, e.g. Mechanical or Electrical Aircraft Fitter, Mechatronics Maintenance, Machinist, Toolmaker or Fabricator.  In years 2 to 4 you will work in placements across Warton and Samlesbury sites, supported by a Skills Coach and Placement Supervisors on products and processes within manufacturing. You will continue to learn 1 day per week in the Academy for Skills and Knowledge. What qualification will you get? Level 3...